ZyXEL Communications NBG-418N v2 User Manual page 82

This screen displays when you select
Fig ure 58
Network > WAN > Internet Connection: PPTP Encapsulation
The following table describes the labels in this screen.
Table 33 Network > WAN > Internet Connection: PPTP Encapsulation
L ABEL DESC RIPT IO N
ISP Parameters for Internet Access
Connection To configure a PPTP client, you must configure the
Type connection and the PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Server IP Address Type the IP address of the PPTP server.
DNS Servers
Attain DNS Click Atta in DNS Auto m a tic a lly
Automatically/ information (and the NBG-418N v2's WAN IP address). Or click
Set DNS you have the IP address of a DNS server.
Manually
First DNS Server Enter the first and second DNS server's IP address in the box fields.
Second DNS
Server
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by either using the NBG-418N v2's
MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address.
Factory default Select this option to use the factory assigned default MAC Address.
Clone the Select this option to clone the MAC address of the computer (displaying in the screen) from
computer's MAC which you are configuring the NBG-418N v2. Once it is successfully configured, the address will
address - MAC be copied to the rom file. It will not change unless you change the setting or upload a different
Address ROM file.
Chapter 7 WAN
PPT P encapsulation.
radio button if your ISP dynamically assigns DNS server
NBG-418N v2 User's Guide
82
Use r Na m e Pa sswo rd
and fields for a PPP
Se t DNS Ma nua lly if you have if