ZyXEL Communications NBG-418N v2 User Manual page 88

Table 38 Network > WAN > IPv6 (continued)(SLAAC/DHCPv6)
L ABEL DESC RIPT IO N
Autoconfiguration Select
Type local address via stateless autoconfiguration.
Select
IP configuration set to DHCPv6 or obtain an IPv6 address automatically.
Router If you select
Advertisement the amount of time in minutes that a device may have an IPv6 address before it is required
Lifetime to renew the lease.
IPv6 Address If you select
Range(Start) server assigns to the clients. Enter the smallest value of the last block of the IPv6 addresses
which are to be allocated.
IPv6 Address If you select
Range(End) server assigns to the clients. Enter the largest value of the last block of the IPv6 addresses
which are to be allocated.
IPv6 Address If you select
Lifetime valid.
Apply Click
Reset Click
Chapter 7 WAN
SL AAC + Sta te le ss DHC Pv6
Sta te ful(DHC Pv6)
when the devices connected to your LAN needs to have their TCP/
SL AAC + Sta te le ss DHC Pv6
Sta te ful (DHC Pv6) , specify the range of IPv6 addresses from which the DHCPv6
Sta te ful (DHC Pv6) , specify the range of IPv6 addresses from which the DHCPv6
Sta te ful (DHC Pv6)
, specify how long (in minutes) the IPv6 addresses remain
Apply to save your changes back to the NBG-418N v2.
Re se t
to begin configuring this screen afresh.
NBG-418N v2 User's Guide
88
if you want the interface to automatically generate a link-
Ro ute r Adve rtise m e nt L ife tim e
, type in the which is