Installing/Removing The Back-Up Battery Of The Simotion P320-4; Preventive Maintenance; Replacing The Backup Battery - Siemens SIMOTION Series Commissioning And Hardware Installation Manual

Hide thumbs Also See for SIMOTION Series:
Table of Contents

Advertisement

11.4

Installing/removing the back-up battery of the SIMOTION P320-4

11.4.1

Preventive maintenance

To maintain high system availability, we recommend the preventative exchange of those PC
components that are subject to wear. The table below indicates the intervals for this exchange.
Component
CMOS backup battery
11.4.2

Replacing the backup battery

Note
The service life of the backup battery is approximately 5 - 8 years, depending on the
environmental conditions.
To be noted before you replace the battery
NOTICE
Risk of damage!
The lithium battery may only be replaced with an identical battery or with a type recommended
by the manufacturer (article number: A5E30314053)
Risk of explosion and release of harmful substances!
Therefore, do not throw lithium batteries into an open fire, do not solder or open the cell body,
do not short-circuit or reverse the polarity, do not heat to above 100° C, dispose of them in
accordance with regulations, and protect them from direct exposure to sunlight, humidity, and
condensation.
Note
A backup battery maintains the contents of the SRAM data on the SIMOTION P320‑4 after
the supply power is switched off.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016
11.4 Installing/removing the back-up battery of the SIMOTION P320-4
WARNING
Exchange interval:
4 years
Service and maintenance
185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotion p320-4 sSimotion p320-4 e

Table of Contents