Connecting The Mw Aerial; Connecting The Speakers - Goodmans 6160 User Manual

Getting Started

Connecting the MW Aerial

Rear Panel of the Unit
• Even when connecting an outside MW aerial , keep the indoor MW loop aerial connected.
CAUTION:
• To avoid noise, keep the aerials away from the System, the connecting cords and the AC power cord.

Connecting the Speakers

Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminal.
1. Connect the speaker cords to the Speaker terminals of the Unit.
Connect the Grey (+) and with black line (–) cords of the right speaker to the red (+) and black (–) terminals marked RIGHT on the System.
Connect the Grey (+) and with black line (–) cords of the left speaker to the red (+) and black (–) terminals marked LEFT on the System.
Right side (rear view)
CAUTIONS:
• Please note the speakers are not magnetically shielded and may cause distortion on the TV.
If this happens move the speakers away from the TV.
5
MW aerial wire (not supplied)
If reception is poor, use an external aerial (not supplied).
MW loop aerial (Supplied)
Grey
Grey
Grey
Grey
with
with
black black
Rotate the loop aerial until you have
the best reception.
Attach the MW loop
to its base by snapping
the tabs on the loop into
the slot in the base.
Left side (rear view)