Table of Contents
Advertisement
Setting the SLEEP Timer
Use the Sleep Timer to turn the System off after a certain number
of minutes . By setting the Sleep Timer, you can fall asleep to music
and know that your System will turn off by itself rather than play
all night.
• You can only set the Sleep Timer when the System is on.
1
During playback a source, press the SLEEP
button.
The "SLEEP" indicator will flash on the display.
2
Set the length of time you want the source to
play before shutting off.
Each time you press the SLEEP button, the time untill turn off
changes as follows:
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
beginning)
3
Wait for 5 seconds.
The "SLEEP" indicator stops blinking and remains lit, and
the display returns to normal before setting the Sleep
Timer.
The System is now set to turn off after the number of minutes
you have set.
To Confirm the Sleep Time:
When the SLEEP button on the Remote Control is pressed, the re-
maining sleep time is displayed. Wait until the display returns to
the original display.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button on the Remote Control until the "SLEEP"
indicator goes out on the display.
• Turning off the System also cancels the SLEEP Timer.
• When the REC Timer or the DAILY Timer has turned
the system on, SLEEP Timer can not be set.
Timer Priority
Since REC Timer and DAILY Timer can be set independently, you
may wonder what happens if the settings overlap. Here are the pri-
orities for REC Timer and DAILY Timer:
• Timer with the earlier time setting will have the priority.
Timer will not operate when other Timer is operating.
• If other Timer is set to an exact same time as the REC Timer,
the REC Timer will have the priority.
❏ REC Timer and DAILY Timer will not operate when SLEEP
Timer is operating.
Example
Setting
ON
REC Timer
DAILY Timer
9:30PM
Operation
ON
REC Timer
DAILY Timer
9:30PM
Operates only in REC Timer mode.
Using the Timers
OFF
ON
OFF
10:00PM
10:30PM
11:00PM
OFF
10:30PM
26
Advertisement
Table of Contents
