Table of Contents
Advertisement
Using the CD Player
Random Play
The tracks of the selected CD will play in random order when this
mode is selected.
1
In Stop mode, set the CD Player in Random
Play mode.
On the Unit
Press the RANDOM button to light the "RNDM" and "1 DISC"
indicator.
At the same time, "RANDOM" appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the "RANDOM"
appears on the display.
The "RNDM" and "1 DISC" indicator also lights up on the display.
Each time the button is pressed, the playback mode changes as follows:
PROGRAM = RANDOM = Normal display (Normal Play) =
(back to the beginning)
6
2
Press the CD
The tracks on the CD are played in random order.
To stop playing, press the 7 button. The Random mode is can-
celed and the "RNDM" and "1 DISC" indicator goes off.
To skip a track during playback, press the ¢ button to
jump to the next track in the random sequence.
REPEAT
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
REPEAT ALL= REPEAT 1DISC= REPEAT 1= Blank display(repeat off)
= (back to the beginning)
REPEAT ALL: In Normal Play mode, all the tracks on all the
CDs are repeated.
REPEAT 1DISC:Repeats all tracks on one CD. (Selectable in
Normal Play only)
Repeats one track.
REPEAT 1:
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEATÔ Blank display
Only the tracks in the program are repeated.
To stop playing, press the 7 button. Changing the source to a
different one (e.g. Tuner) will also stop playing. The Repeat mode
is canceled and the Repeat indicator goes off.
13
button.
Tray Lock Function
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close 0 button on the Unit is pressed.
Locking the Tray
1
Turn on the System and enter CD mode.
2
While pressing down the
0
CD Open/Close
"LOCKED" appears on the display.
• If you try to open the tray by pressing the 0 button,
"LOCKED" appears on the display to let you know that the tray
has been locked.
Unlocking the Tray
Repeat above steps 1 and 2.
"UNLOCKED" appears on the display.
Now, you can use the tray normally.
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
7
button, press the
button on the Unit.
Advertisement
Table of Contents
