Table of Contents
Advertisement
Using the Tuner
Numeric
Keys
S. -
RDS MODE
TAPE A
Stations can be tuned in manually, automatically, or from preset
memory storage.
❏ Before listening to the radio:
• Make sure that both the FM and MW aerials are correctly
connected. (See pages 4 and 5).
One Touch Radio
Just press the FM/MW button to turn on the System and start play-
ing the station that was listend to be when the system was tuned off.
❏ You can switch from any other sound source to the radio by
pressing the FM/MW button.
Tuning In a Station
1
Press the FM/MW button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and MW.
F M /MW
(on the Unit)
2
Select a station using one of the following
methods.
FM/MW
S. +
DISPLAY
TAPE B
F M /MW
or
(on the Remote Control)
B and dis play, Frequenc y dis play, Pres et c hannel
* When the S ys tem is in us e, the dis play s hows other items as well.
For s implic ity, we s how here only the items des c ribed in this s ec tion.
• Manual Tuning
Briefly press the 22 or ¡ button repeatedly until you find
the station you want.
• Auto Tuning
Press and hold down the 22 or ¡ button for 1 second
or more and then release it, the frequency is scanned, auto-
matically until a station is found.
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset number you want, using the 4 or ¢
button.
Example:
Press the ¢ button until the preset number "P12" appears
on the display. Then, the display will show the preset
number's band and frequency.
Preset tuning using the Remote Control:
Enter the preset number you want to recall using the numer-
ic keys. See "Entering Numbers with the Remote Con-
trol" on page 8.
SET
FM/MW
FM mode indic ators
OR
OR
14
Advertisement
Table of Contents
