Timer Operation; Sleep/Preset Equalizer/Mute; Connecting An External Audio Source - Goodmans MICRO1103 Instruction Manual

TIMER OPERATION

Before setting the timer, make sure
the clock is correctly set.
TIMER ON SETTING
Press CD, TUNER to select the
desired sound source.
Please note when the timer turns on
the unit, the source will be the same
as the last source listened to before
turning off the system.
For TUNER
1. Select TUNER, press M-UP/
REPEAT to select a preset
station.
2. The display will show the
selected preset station and
frequency.
3. Press TIMER on the remote or
press and hold SLEEP/TIMER
on main unit timer appears on
display.
4. Press and hold PROG/MEM on
the remote or MEMORY/CLOCK-
ADJ on the main unit until the
hour digit starts to flash.
5. Press the UP/FF or DOWN
F
REW to set the hour.
B
6. Press PROG/MEM or MEMORY/
CLOCK-ADJ again.
7. Use UP/FF or DOWN
F
REW to set minutes.
B
8. Press PROG/MEM or MEMORY/
CLOCK-ADJ to set timer.
For CD
1. Insert a disc into the CD tray.
2. Press TIMER.
3. Follow steps 3 to 8 under tuner
timer setting.
HELPLINE PHONE NUMBER 0870 873 0080
15
To cancel the Timer press the
Timer Button on the Remote.
SLEEP
1. Press SLEEP, 'SLEEP' appears
on the display.
2. Keep pressing SLEEP to adjust
the sleep time in the order of
90>80>70....10 minutes.
3. To cancel the SLEEP mode,
press SLEEP again.
PRESET EQUALIZER
Press PRESET EQ to add a digital
sound effect to the audio output.
MUTE
Press MUTE to mute the sound
output. Press again to cancel this
mode.
CONNECTING AN EXTER-
NAL AUDIO SOURCE
RED
RCA JACK
WHITE
RCA JACK
AUX input can be used to connect
exernal equipment (e.g. TV or VCR)
to this system connect as shown
below.
To Auxiliary player
Line output
R AUX IN L
HELPLINE PHONE NUMBER 0870 873 0080
16