Presetting Stations; Fm Reception Mode - Goodmans 6160 User Manual

• MW reception can sometimes be improved by rotating
the MW loop aerial.

Presetting Stations

Up to 30 FM stations and up to 15 MW stations can be stored in presets.
• During presetting stations, if no button is pressed
for 5 seconds, the display returns to the band/frequency
display. In this case, repeat steps from the beginning.
TUNING
or
Using the Unit
1
Select a band by pressing the FM/MW button.
22 ¡
2
Press the or
tion.
3
Press the SET button.
"SET" will flash for 5 seconds.
4
While " SET" is flashing, press the
button to select the preset number.
¢:
Increases the preset number by 1.
4:
Decreases the preset number by 1.
5
Press the SET button.
"STORED" appears, and after 2 seconds, the display returns to
the band/frequency display.
6
Repeat above steps 2 to 5 for each station
you want to store in memory with a preset
number.
To change the preset stations, repeat the same steps as
above.
• In step 4, you can select the preset number using the nu-
meric keys on the Remote Control.
15
PRESET
or
button to tune in a sta-
4 ¢
or
CAUTION:
• Even if the System is unplugged or if the power
failure occurs, the preset stations will be stored
for a few days. However, if the preset stations
are erased, you will need to preset the stations
again.

FM Reception Mode

When you are tuned in to an FM stereo broadcast, the "ST (Ster-
eo)" indicator lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but is lost stereo effect.
MObutton on the Remote Control so that
Press the FM
the " MONO" indicator lights up on the display.
ST
To restore stereo, press the
Remote Control so that the "MONO" indicator goes off.
Selecting other station will also cancel the FM Mono mode and re-
store the stereo effect.
Using the Tuner
MONO
FM MObutton on the