Connecting To Mains Supply - Goodmans 4214 Instruction Manual

C
ONNECTING TO
This appliance may be fitted with a non-rewireable plug. If it is necessary to change the
fuse in a non-rewireable plug the fuse cover must be refitted. If the fuse cover is lost or
damaged, the plug must not be used until a replacement available from the appliance
manufacturer is obtained. It is important that the colour of the replacement fuse cover
corresponds with the colour marking on the base of the plug.
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged, it should be cut off and an appropriate plug fitted following the wiring
instructions below. The plug removed must be disposed of safely as insertion into a 13A
socket is likely to cause an electrical hazard.
For your own safety read the following instructions carefully before attempting to
connect this unit to the mains.
M (AC) O
AINS PERATION
This unit is designed to operate on 230 V, 50 Hz current only. Connecting it to other power
sources may damage the unit
The wires in this mains lead are coloured in accordance with the following code :
BLUE = NEUTRAL BROWN = LIVE
I
MPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:-
be fitted, or if any other type of
Plug , or on the Distribution Board.
C
AUTION
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
S P
AFETY RECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230 Volts 50 Hz - AC only.
This symbol means that this unit is double insulated. An earth connection is not required.
CAUTION
CLASS 1 LASER PRODUCT
Use of Controls or adjustments or performance of procedures other than those specified
herein may result hazerdous radiation expisure.
M S
AINS
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.
No connection is to be made to the earth terminal of
the plug.
If a 13 Amp (BS 1363) Plug is used, a 3 Amp Fuse must
Plug is used a 3 Amp Fuse must be fitted, either in the
- 1 -
UPPLY