Related Manuals for Goodmans GMC1042MP3
Summary of Contents for Goodmans GMC1042MP3
-
Page 1: Instruction Manual
GMC1042MP3 INSTRUCTION MANUAL CD/MP3 CD/MP3 TUNER/ TUNER/ BAND BAND Before operating this unit, please read this Owners manual carefully. -
Page 2: Important Safety Instructions
WARNINGS TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. WARNING RISK OF ELECTRICSHOCK DO NOT OPEN DO... -
Page 3: Quick View
Quick View To get the maximum enjoyment and performance from this product, please read this manual and familiarize yourself with the functions and controls before attempting to operate it. Correct usage will assure years of trouble free performance and listening pleasure. Front View PUSH OPEN (TOP) - Page 4 Remote Control Standby Tuner/Band Random CD Remain MP3 10- MP3 10+ ID3/Auto Seek VO LUM E Volume - Volume + CD Play/Pause CD Stop Track/ Track/ Tune Up Tune Down Tone Mute Memory Repeat...
-
Page 5: Getting Started
Getting Started Unpacking your Installation GMC1042MP3 Micro Speaker Connection System 1. Unwind the cable from each speaker. 2. At the rear of the CD micro system there Carefully remove your CD micro system from its are two speaker sockets. packaging. You may wish to store the packaging for future use. -
Page 6: Remote Control
Setting the Clock Remote Control The clock can be set by using the buttons on The remote control requires 1 x 3V Lithium the front of the unit or the remote control. Battery, (CR2025). Setting the Clock 1. Connect the main plug to a main supply Battery Installation scoket. -
Page 7: Ac Power Operation
Headphones Operation Note: Reduce the volume to a low level before putting on headphones. Adjust volume to a comfortable level. A headphones socket is provided for private Now your CD micro system is installed and listening. It is located on the front of the unit. ready for use, please refer to the following see page 3 instructions for correct operation. - Page 8 Note: It is normal for the position of the Radio antenna to be adjusted to achieve the best reception. If selecting the wall mounted option ensure that you can receive the radio stations you listen to Operation before fixing. At the front of the CD micro system, or using the remote control, press POWER, to switch the CD micro system on.
- Page 9 Preset Memory Stations Your CD/MP3/WMA micro system can store up to 20 preset radio stations, 20 FM and 20 MW Once a station is in a preset memory it can be retuned by pressing the M-UP/REPEAT button on either the remote control or the front of the unit until the desired preset number is displayed.
-
Page 10: Track Selection
Playing a CD CD player On CD micro system, or remote control: 1. Press the play/pause button#$. The display will show the track number and Operation the elapsed playing time. 2. To pause playback, press the play/ At the front of the CD micro system, or using the pause button#$. -
Page 11: Programmed Playback
Stop Play Use the SKIP/TUNING buttons to select the track number to be played back second in the 1. Press STOP/& on the remote control programmed sequence. or the unit. The display will show the 5. Press the PROG./MEMORY button. total number of tracks and total 6. - Page 12 Place in the MP3/WMA formatted disc, after reading TOC (Table of Content) The player will automatically detect the MP3/WMA formatted disc and <MP3>/<WMA> will be shown on the LCD Display. Press PLAY button to start playback. To stop playing, press STOP button. Note: It is normal to take longer time for the player to read MP3/WMA disc, as the...
-
Page 13: Compact Disc Care
Compact Disc Care Fault Finding CD Handling Product will not operate. Ensure product is connected to the When handling CDs: mains supply and switched ON. Do not touch the recorded surface. Ensure the POWER button has been Do not stick paper, or write, on either pressed.
Need help?
Do you have a question about the GMC1042MP3 and is the answer not in the manual?
Questions and answers