Table of Contents
Advertisement
Warning
The charger could be used only to specified product.
Make sure the voltage of the AC power is same with the given voltage of the charger before connecting
them.
Do not shut circuit the output plug of the charger.
Do not charge non-Ni-Cd, non-Ni-MH battery or wasted battery.
Step 1:Turn off the calibrator.
Step 2:Connect the plug into the charging jack of the terminal.
Step 3:Plug the charger into the AC power.
Note:
In normal charging function, the indicating light of the charger lights on.
When finished, the charging function stops automatically, and the indicating light becomes dark.
Blinking of the indicating light means the charger is not connected or no battery is inside.
Note:
Do not use the calibrator when it undergoes charging, otherwise, the charging will be prolonged.
12 Maintenance
12.1 cleaning the calibrator
Warning
To avoid electrical shock or damaging the meter, serve the meter only by the replacement parts specified and
never get water inside the case.
40
Advertisement
Table of Contents
