TECPEL CL-327A Manual page 17

Step 1: Connect black lead cables for source to the
''ΩRTD'' terminal and the red lead cable to the "VTc"
terminal.
Step 2: Connect the other ends of the cables to the
input of equipment under test while making sure the
polarities are correct.
Figure 7 Sourcing Resistances and RTD
For Frequency,Pulse and Switch (Figure 8)
Step 1: Connect the black lead cable for source to the
COM output terminal and the red lead cable to the "Hz"
output terminal.
Step 2: Connect the other ends of the cables to the input
of equipment under test while making sure the polarities
are correct.
Figure 8 Sourcing Frequency, Pulse and Switch
7.2 Sourcing DC Voltage
17