Table of Contents
Advertisement
manual.
Table 1 Explanations of International Electrical Symbols
EARTH GROUND
Warning
To avoid possible electric shock or personal injury:
Do not apply more than the rated voltage, as marked on the calibrator, between terminals or between any
terminal and earth ground;
Follow all equipment safety procedures;
Do not connect the probe of the testing lead with any live power when the other end has been inserted into
the current jack;
Do not use the meter if it is damaged. Before using the meter, inspect the case. Look for cracks or missing
plastic .Pay particular attention to the insulation surrounding the connectors;
Make sure the battery door is closed and latched before operating the meter;
Remove test leads from the meter before opening the battery door;
Inspect the test leads for damaged insulation or exposed metal. Check test lead continuity. Replace
damaged test leads before using the meter;
When using the probes, keep fingers behind the finger guards on the probes;
Connect the common test lead before connecting the live test lead. When disconnecting test leads,
disconnect the live test lead first.
Do not use the meter if it operates abnormally. Protection may be impaired. When in doubt, have the
WARNING
INFORMATION
3
Advertisement
Table of Contents
