Table of Contents
Advertisement
V. Battery Changing:
1.When the battery voltage drops below proper operation
range the
and the battery will need to be changed.
2.Before changing the battery, switch the function selector
to "OFF " and disconnect test leads.
Open the back cover using a screw driver. Replace the
old batteries with two UM-4 or AAA size batteries.
3.Close the back cover and fasten the screw.
VI. Maintenance:
To avoid contamination or static damage, do not touch
the circuit board without proper static protection.
* Remove the batteries, if the meter is not used for
extended periods of time. Do not store the meter in a
high temperature/humidity environment.
* When measuring current, keep the cable at the center
of the clamp to get more accurate readings.
Periodically wipe the case with a dry cloth and without
detergent. Do not use abrasives or solvents on this
instrument.
symbol will appear on the LCD display
CAUTION
REMARK
CLEANING
13
Instruction Manual
Advertisement
Table of Contents
