Table of Contents
Advertisement
Caution
To avoid damaging the plastic lens and case, do not use solvents or abrasive cleansers.
Clean the Calibrator with a soft cloth dampened with water or water and mild soap.
12.2 Calibration or Sending to the Service Center
Calibration, maintenance or repair work unmentioned in this manual should be undertaken by the experienced
worker. If the meter operates abnormally, inspect the batteries first and replace them if necessary.
If you suspect that the meter has failed, review this manual to make sure you are operating it correctly. If
the meter still fails to operate properly, pack it securely (in its original container if available) and forward
it, postage paid, to the nearest Service Center. The company assumes NO responsibility for damage in
transit.
The Company guarantees a rapid repair and maintenance and delivers the meter back as soon as
possible. Please refer to the Warranty. If the warranty is due, you will be billed for the maintenance and
repair work. If the calibrator is not within the Warranty range, you can contact the warranted service
center for enquiring about the expenditure. Please refer to the Chapter "Contact Us" to find a warranted
service center.
41
Advertisement
Table of Contents
