Description Of The Equipment; Packing; Unpacking And Supplies; Definitions - Fujitsu Waterstage WOYG160LJL Installation Manual

Air to water heat pump split single service, refrigerant r410a inverter, outdoor/hydraulic unit
Hide thumbs Also See for Waterstage WOYG160LJL:
Table of Contents

Advertisement

 Description of the equipment

Packing

• 1 package : Outdoor unit.
• 1 package : Hydraulic unit and outside temperature
sensor.

Unpacking and supplies

While the courier is still present, carefully check the
general appearance of the appliances and check
that the outdoor unit has not been laid in a horizontal
position.
In the event of a dispute, send any relevant reservations
to the carrier in writing within 48 hours and send a copy
of the letter to Customer Services.
Packing contents list
Heat Pump
Model
Waterstage SHP 16
Waterstage SHP TRI 15
Waterstage SHP TRI 17

Optional equipment

• Dual circuit kit (code UTW-KZSXJ)
for connecting 2 heating circuits.
• Regulation extension kit (code UTW-KREXD)
to manage a 2nd heating circuit, swimming pool,
telephone modem etc...
• DHW kit (code UTW-KDWXD)
for connecting a mixed DHW tank
(with built-in electrical backups).
• Boiler connection kit (code UTW-KBSXJ)
for connecting a boiler to the heat pump.
• Room thermostat (code UTW-C55XA),
Wireless room thermostat (code UTW-C58XD)
for correcting the ambient temperature.
• Remote control (code UTW-C74TXF or UTW-C74HXF),
Wireless remote control (code UTW-C78XD)
for correcting the ambient temperature and
programming the heat pump.
• Cooling kit (code UTW-KCLXD).
• High flow rate circulation pump kit (code UTW-PHFXG)
for the installation of 1 underfloor heating circuit.
- 6 -

Definitions

- Split: The heat pump consists of two elements
(an outdoor unit to be installed outdoors and a hydraulic
unit to be installed inside the dwelling).
- Air/water: The surrounding air is the energy source.
This energy is transmitted to the heating circuit water
by the heat pump.
- Inverter: The fan and compressor speeds are
modulated according to the heating requirements.
This technology enables you to save on energy and
operate on a single-phase power supply, whatever
the heat pump's output, by avoiding pulling significant
amounts of current at start-up.
- COP (Coefficient of Performance): This is the
relationship between the energy transmitted to the
heating circuit and consumed electrical energy.
Outdoor unit
Reference
WOYG160LJL
WOYK150LJL
WOYK170LJL
Operating Range
This heat pump provides:
- Heating in winter,
- The management of electrical backups, for extra
heating on the coldest days,
or
- Installation with boiler connection* for extra heating on
the coldest days,
- Management of two heating circuits*,
- Production of domestic hot water* (provided that it is
combined with a mixed DHW tank),
- Cooling in summer* (for underfloor heating-cooling
system or fan-convectors).
These options require the use of additional kits
*:
(see chapter "Required accessory" or "Optional equipment").
Hydraulic unit
Code
WSYG160DJ6
WSYK170DJ9
Waterstage / Installation / 2011 - EN

Advertisement

Table of Contents
loading

Table of Contents