Electrical Connections On The Outdoor Unit Side; Access To Connection Terminals; Access To Outdoor Unit's Terminal Block; Connections Of The Outdoor Unit's Terminal Block - Fujitsu Waterstage WOYG160LJL Installation Manual

►

Electrical connections on the outdoor unit side

Access to connection terminals:

- Remove the front plate. Remove the screws and front panel.
- Make the connections according to the diagram(s)
Use cable clamps to prevent any power cables from being disconnected accidentally.
Interconnection
between outdoor unit
and hydraulic unit
fig. 30 - Access to outdoor unit's terminal block
front
Sortie avant
fig. 32 - Feeding cables and refrigeration connections from the outdoor unit
- 36 -
fig. 34, page
Terminal
Cable clamp
Main
electricity supply
Sortie latérale
side
40.
■ Waterstage SHP 16
Main
electricity supply
■ Waterstage SHP TRI 15
Waterstage SHP TRI 17
Main
electricity supply
fig. 31 - Connections of the outdoor unit's terminal block
Waterstage / Installation / 2011 - EN
Terminal
L N 1 2 3
POWER INDOOR UNIT
Interconnection
between outdoor unit
and hydraulic unit
Terminal
L1 L2 L3 N 1 2 3
POWER INDOOR UNIT
Interconnection
between outdoor unit
and hydraulic unit
Sortie dessous
lower