Controller Menu; Setting Parameters - Fujitsu Waterstage WOYG160LJL Installation Manual

 Controller Menu
▼ General
Only the parameters accessible at the levels:
U - end user.
I - Commissioning
S - Specialist.
are described in this document.
The access levels are specified in the second column of
the table by means of the letters U, I and S.
The OEM parameters are not described and require a
manufacturer access code.
OK
Press and release
Time of day and date
User interface
Heating circuit 1 timer
programme
...
Press for 3
seconds
End user
Time of day and date
User interface
Heating circuit 1 timer
programme
...
▼ Recommended settings for the parameters depending on the installation's emitters
720 (CC1)
Heating curve
1020 (CC2)
slope
Curve 721 (CC1)
1021 (CC2)
displacement
740 (CC1)
Min.
outgoing value 1040 (CC2)
741 (CC1)
Max.
1041 (CC2)
initial setpoint
DHW charging
5030
time limitation
- 50 -
End user
OK
Hours / minutes
Day/Month
Year
Start-up
Hours / minutes
Day/Month
Year
End date of summer time
End date of summer time
Very Low Temperature
Radiators /
Heating-cooling floor
0.25 to 0.5
0
Factory (17 °C)
50 °C
Factory (90 min)

▼ Setting parameters

- Selecting the desired level.
- Scroll the list of menus.
- Selecting the desired menu.
- Scroll the function lines.
- Selecting the desired line.
- Adjusting the parameter.
- Validate the setting by pressing OK.
- To return to the menu, press ESC.
If no setting is made for 8 minutes, the screen
automatically returns to the basic display.
1
2
3
Specialist OEM
1
2
3
4
5
Low temperature Dynamic radiators or
radiators fan-coil heaters
0.5 to 1.25
0
Factory (17 °C)
Factory (55 °C)
Factory (90 min)
OK
Time 1...24 h
Minutes 0...60 min
01.01...31.12
Classic
temperature
radiators
0.4 to 1.1 1.25 to 3
4 *
Factory
30 or 35 °C
(17 °C)
65 °C 65 °C
Factory
40 min
(90 min)
Waterstage / Installation / 2011 - EN
OK
0