Making Measurements On The Map Display Area; Deleting Features - Thales Mobile Mapper User Manual

68

Making Measurements on the Map Display Area

You can measure the distance and heading between any
points displayed in the Map Display area:
- On the toolbar, click
map from which to start the measurement. The start point
is then marked with a small square symbol.
- Then, as you move the mouse cursor away from the start
point, MobileMapper Office will calculate the length and
heading from the current location of the cursor to this
point
- If you click on a second point, a straight line will appear
on the map between the start point and the second point.
MobileMapper Office will also start calculating the dis-
tance and heading from the current location of the cursor
to the second point, plus the total length from the mea-
surement's start point.
- To stop measuring distances and headings on the map,
press the Esc key.

Deleting Features

You can delete features from the Map Display area, and so
from the open job, using the following procedure:
- Make sure none of the buttons on the toolbar are active
- Click on the feature you want to delete. The feature then
appears surrounded by a thick pink frame
- On the menu bar, select
keyboard, press the Del key. A warning message asks
you to confirm the delete operation
- Click the button to let MobileMapper Office delete
Yes
the feature, or the
, then click on the point on the
Tools>Delete Feature
button to cancel this operation.
No
, or on the