Thales Mobile Mapper User Manual page 13

Region & Area Screens
Time & Date Screens
3. If you understand and agree to the warning presented,
press ENTER before the 10 seconds have elapsed. Other-
wise, the unit will shut off. A message box is then dis-
played indicating that the unit needs to be initialized.
4. Press ENTER. The unit asks you to select your region
and area. Use the up/down arrows to highlight your gen-
eral region and press ENTER. Again, use the up/down
arrows to highlight your area and press ENTER.
5. The cursor appears in the
input your local time. Please enter the time in 0-12 hr.
format, not in 0-24 hr. format. Set your local time using
the arrow keys as follows: use the up arrow to increment
the highlighted figure, or the down arrow to decrement it.
Then press the right arrow to highlight the next figure.
Set this figure now using the up or down arrow, etc. Be
sure that you set the AM/PM indicator. When the time is
correct, press ENTER.
The last piece of information needed is the date. As
above, using the arrow keys, enter the present date and
then press ENTER.
All the information that the unit needs to speed up the
process of computing its first fix has been entered and
the field is highlighted.
Done
field, waiting for you to
Time
7