Creating A Multi-Leg Route From The Track History; Activating/Deactivating A Multi-Leg Route - Thales Mobile Mapper User Manual

Create Route screen
Route List screen
44
The Create Route screen is now displayed. Note that the first
line on this screen is highlighted.
Press ENTER. The Add WPT screen is now displayed. Se-
lect the category of points containing the first waypoint of
the route and press ENTER. Choose a point from the list and
press ENTER. The first waypoint in the route is now defined
and you are now prompted to define the second one. Resume
the instructions in this paragraph for the second point, then
for the third, etc.
When the last point of the route is defined, highlight the
field on the Create Route screen and then press EN-
Route
TER to save the route.

2. Creating a Multi-leg Route from the Track History

Press NAV to display a navigation screen, press MENU,
scroll down to
Routes
Regardless of which route is highlighted in the route list,
press MENU again and highlight the
Press ENTER. MobileMapper then takes you back to the
Route List screen on which you can see that the track history
has been saved as the last route in the list. This route uses a
naming convention of "T01P01 to T01Pxx" where Pxx indi-
cates the number of points in the route.

3. Activating/deactivating a Multi-Leg Route

Press NAV to display a navigation screen, press MENU,
scroll down to
Routes
In the Route List screen now displayed, scroll down the list
and highlight the route you want to activate. Press MENU,
highlight the
Activate Route
bileMapper comes back to the Route List screen where the
activated route now appears in bold characters. Press NAV to
navigate along this route.
To deactivate this route, press MENU, highlight
press ENTER, highlight the activated route (shown in bold
characters), press MENU, highlight
press ENTER. The route is now deactivated.
and press ENTER.
Save Trk to Rte
and press ENTER.
option and press ENTER. Mo-
Deactivate Route
Save
option.
,
Routes
and