Nmea; Baud Rate - Thales Mobile Mapper User Manual

58

18.NMEA

This option allows you to select the NMEA message that
will be output from MobileMapper. Your choice will
depend on which message is needed by the device con-
nected to MobileMapper:
- : Autopilot Sentence "A"
V1.5 APA
- : Crosstrack error according to NMEA0183
V1.5 XTE
V1.5
- : Standard GPS position message according
V2.1 GSA
to NMEA0183 standard in version 2.1
After selecting the
use the up/down arrow to highlight the desired choice
and then press ENTER.

19.Baud Rate

This option enables you to set the baud rate of the data
being sent out from the MobileMapper's output port. The
possible choices are: 1200, 4800, 9600, 19200, 57600 or
115200 baud.
After selecting the
use the up/down arrow to highlight the desired choice
and then press ENTER.
option from the Setup menu,
NMEA
option from the Setup menu,
Baud Rate