Navigation Screens; Map Screen - Thales Mobile Mapper User Manual

Navigation Screens

The Map screen has two
MobileMapper
modes: Position and

Map Screen

offers 7 differ-
Cursor. Use any arrow
Press NAV
key to select Cursor
ent navigation
mode, ESC to return to
Satellite Status Screen Compass Screen
screens to help
Position mode
you locate
Press NAV
yourself or
Speedometer Screen Large Data Screen
When a Position screen
navigate to
is displayed, press the
etc.
waypoints or
Left or Right arrow key
Data Screen Position Screen 1
to display the other.
point features
Position Screen 2
Press this key again to
in an existing
return to the previous
Road Screen
job. From any
screen.
displayed screen, simply press the NAV button to access
navigation screens. To display the next navigation screen,
Except for the Satellite
press NAV again. The sequence of navigation screens is as
Status screen, all naviga-
tion screens can be cus-
shown above. It can be scrolled in the reverse direction by
tomized.
pressing ESC once any of these navigation screens is dis-
played.
Each type of navigation screen is presented hereafter.
Map Screen
The Map screen shows a map of the area surrounding your
current location. Use the IN and OUT buttons to adjust the
scale.
The Map screen is always in the Position mode when you ac-
cess this screen. In this mode, your present position is indi-
cated by the large arrow icon in the center of the display. If
you are moving, the arrow will point in the direction that you
are heading. At the bottom of the screen is the scale for the
map displayed and two data fields that can be customized, or
turned off, depending upon your needs.
The present position icon will change to an hourglass when
Map screen the MobileMapper is unable to compute a position fix due to
in Position mode
poor signal reception.
26