Defining The Height System; Enabling The Chosen Coordinate System; Creating A New Coordinate System; Creating A New Geodetic System - Thales Mobile Mapper User Manual

3. Defining the height system

- In the lower part of the
check the desired option (
metric elevations
the
Geoid Model
set to
EGM96 Worldwide Geoid Model
geoid model available in MobileMapper Office.

4. Enabling the chosen coordinate system

- Click
OK
dinate system you have just chosen.

Creating a New Coordinate System

If the coordinate system you should use for a job is not avail-
able from the list and you have the complete definition of
this coordinate system, follow the procedure below to create
this coordinate system in Mobile Mapper Office.
- On the menu bar, select
A new dialog box opens showing the name of the
tem...
currently used coordinate system (see below). This dia-
log box allows you to create and select a new system.

1. Creating a new Geodetic system

- Click the down arrow on the right of the
combo box and highlight
down arrow on the right of the
box and highlight the first option in the list (
Coordinate System
). If you choose
field just below will automatically be
to close the dialog box and enable the coor-
Options
dialog box,
Ellipsoid elevations
Orthometric elevations
as this is the only
and then
Coordinate Sys-
System Type
. Then click the
Geodetic
Geodetic Datum
or
Ortho-
,
combo
).
NEW
109