Routes; Goto Route; Multi-Leg Route; Creating A Multi-Leg Route - Thales Mobile Mapper User Manual

A GOTO route is a one-
leg route whose two ends
are your current position
and the chosen destina-
tion point.
WPT6
WPT5
WPT4
WPT3
WPT2
WPT1

Routes

As explained below, MobileMapper can handle two types of
routes: GOTO route and multi-leg route.

GOTO Route

This in fact a route that you define when:
- You select a feature on the Map screen, you press
ENTER to display the attributes of this feature, and you
press ENTER again to enable the Goto function to this
feature (by default, the
screen is highlighted). The same can be done to choose a
POI or a waypoint as the destination point.
- You use the
GOTO
choose a POI or waypoint as the destination point.
GOTO routes are not saved in memory. When you turn your
MobileMapper off and then back on, the GOTO route is
gone. You need to create a new GOTO route if you intend on
completing the route.

Multi-leg Route

A multi-leg route consists of several waypoints or POIs that
you should reach one after the other. The segment between
any two consecutive waypoints or POIs is called a "leg." Un-
like GOTO routes, multi-leg routes can be stored in memory.

1. Creating a Multi-leg Route

Press NAV to display a navigation screen, press MENU,
scroll down to
Routes
The Route List screen is now displayed. Scroll down the list
and highlight the first
field at the bottom of the
Goto
option from the Menu screen and you
and press ENTER.
route in the list. Press ENTER.
Empty
43