Time Format; Units - Thales Mobile Mapper User Manual

Default time format:
Local AM/PM
Default units: km/m/kph/
hectares

8. Time Format

This option allows you to select the time format you
want to use in MobileMapper. You can choose from three
different time formats: Local 24Hrs, Local AM/PM or
UTC.
After selecting the
menu, choose the time format that suits you and then
press ENTER.
If you have selected
be prompted to enter your local time.

9. Units

This option allows you to select the units of measure-
ment that will be used when displaying navigational data
or features being logged.
All sets of units are formatted as follows:
unit/short distance unit/speed unit/area unit
from 5 different sets of units.
You can also create your own set of units by selecting
at the end of the list. You are then prompted to
Advanced
specify the unit you wish to use for each type of possible
measure, i.e. Distance, Speed, Elevation, Bearing and
Area.
After selecting the
choose a set of units from the displayed list and then
press ENTER. If you have selected
appears prompting you to choose a unit for each type of
measure. Select the first measure in the list, press
ENTER, choose a unit and press ENTER again. This
takes you back to the former screen where you can select
the second measure, etc. When all units are defined,
press ESC to come back to the Setup menu.
option from the Setup
Time Format
or
Local 24 Hrs Local AM/PM
option from the Setup menu,
Units
, you will
long distance
.You can select
, a new list
Advanced
53