Thales Mobile Mapper User Manual page 108

102
- On the menu bar, select
If no Map region has been defined previously in the
Map.
Map Display area, a message will pop up warning you
that the whole background map is going to be uploaded.
If you click
Yes
, the procedure will be aborted.
No
In the next dialog box that opens, you have to select the
destination of the background map. This can be the
MobileMapper receiver (GPS Unit), the local SD Card
reader or the PC hard disk (Hard Drive).
- Check
Upload to GPS Unit
have previously run the procedure described on page 70
to test the communication with the handheld, then a new
dialog box will be displayed reporting successful con-
nection to the handheld. Otherwise, MobileMapper
Office will suggest that you change the settings of the PC
port connected to the handheld.
- After successful connection to the handheld, click the
button again. A new dialog box indicates the size of
Next>
the file to be downloaded.
- You just have to click the
per Office complete the upload operation. The following
message is displayed while the file is being uploaded:
File>Upload to GPS>Background
, the procedure will continue. If you click
and click the
Finish
button. If you
Next>
button to let MobileMap-