Thales MobileMapper CE Quick Setup Manual

Hide thumbs Also See for MobileMapper CE:

MobileMapper CE Quick Setup Guide

23 August 2005

A. Open the box and make sure you have everything

The photograph below shows everything that should have been shipped to you. It

includes the part numbers.

Thales

MobileMapper Quick CE Setup Guide

Page 1

Table of Contents

Need help?

Do you have a question about the MobileMapper CE and is the answer not in the manual?

Page 1 MobileMapper CE Quick Setup Guide 23 August 2005 A. Open the box and make sure you have everything The photograph below shows everything that should have been shipped to you. It includes the part numbers. Thales MobileMapper Quick CE Setup Guide...
Page 2 B. Charge the internal, removable battery 1. Attach the I/O Module to the back of the MobileMapper CE as shown in the Getting Started Guide. 2. Plug the recharging transformer into a wall plug and attach the DC end into the I/O Module.
Page 3 After you tap OK – and every time you turn on MobileMapper CE - it will automatically set the correct time as soon as it tracks the first GPS satellite. D. Set GPS recording parameters The GPS Settings tool is used to control the precision required for GPS positions. To access the tool, tap Start>Programs>GPS Utilities>GPS Settings.
Page 4 For a full description of setting up Bluetooth communication in the MobileMapper CE, for example to access real-time differential corrections, please refer to the Getting Started Guide or to the tech notes titled “Setting up MMCE for Beacon Corrections.” Both are available from the MobileMapper CE folder at ftp.thalesnavigation.com. Thales...