Changing The Order Of Layers; Removing Layers - Thales Mobile Mapper User Manual

98

Changing the Order of Layers

When you build the background map, the first layer you
placed in the table will be brought to the front, and the last
one will be sent to the back. Intermediate layers will occupy
intermediate positions in the layer stack.
If one of your layers contains area features, it is important
that this layer be placed at the bottom of the table otherwise
all layers containing point or line features located within
these area features would be hidden by these features.
To change the position of a layer in the table:
- Highlight the row containing this layer by clicking on
any cell in this row
- Click or
move up or down the layer by one row. If necessary,
repeat this step until the layer is at the right position in
the table.

Removing Layers

- Highlight the layer you want to remove
- Click , or select
press the Del key. This instantly removes the layer from
the table.
, or select
Layer>Move Up
Layer>Remove
or
Move Down
from the menu bar, or
to