Beeper; Clear Memory - Thales Mobile Mapper User Manual

16.Beeper

This option allows you to select which actions will cause
the beeper to sound. You can select one of the following
choices:
- (beeper will never sound)
Off
-
Keys Only
-
Alarms Only
-
Keys & Alarms
pressed or an alarm is activated)
After selecting the
use the up/down arrow to highlight the desired choice
and then press ENTER.

17.Clear Memory

This option allows you to clear one of the following data
sets from MobileMapper's memory:
-
Track history
the Map screen from memory
-
Wpts/Routes
memory
- : Will clear all routes from memory
Routes
-
Reset default
factory defaults
- : Will clear all memory
All
After selecting the
menu, use the up/down arrow to highlight the desired
choice and then press ENTER. MobileMapper will ask
you to confirm your choice. If you have selected
MobileMapper will then shut off. The next time it is
turned on, it will prompt you that it needs to be initial-
ized.
(pressing a key causes a beep)
(when an alarm is activated)
(beeper will sound when a key is
option from the Setup menu,
Beeper
: Will clear the track history displayed on
: Will clear all waypoints and routes from
: Will reset the receiver by restoring all
Clear Memory
option from the Setup
,
All
57