For The Best Results - Dog trace d–mute User Manual

Electronic anti bark collar
Hide thumbs Also See for d–mute:
Table of Contents

Advertisement

Using the fine adjust ment trimmer, you can decrease or increase the sensitivity of the
collar to vocal cords vibrations (see pic. on page 13). It is set to a medium value by factory
default. By turning the trimmer anti -clockwise, the sensitivity is decreased and by turning
it clockwise, it is increased.
Attention: trimmer is prone to tearing down!

For the best results

● This electronic device d–mute is water proof only on condition of the good state of the
seal.
● Do not allow water into the device if it is open.
● We recommend you to replace the rubber seal, which is placed under the cover of the
battery compartment of the transmitter and the receiver, once a year.
● If the device is not used for a longer time, take out the batteries from the battery
compartment.
● Do not leave old battery in the device, it can damage the device.
● Before fixing the collar check that the contact points are tight.
● Do not leave the collar on the neck longer than 12 hours a day.
Using the d-mute in winter
When using d-mute in winter, please keep in mind:
● Low humidity – causes less skin conductivity. It is necessary to provide better
conductivity between the contact points of the receiver and the dog's skin. This can be
achieved by lubricating the dog's skin in the touching points of the contact points with
vaseline, baby oil, hand lotion, etc.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D–mute small

Table of Contents