Warning And Safety Notes - Skyrc B6AC+ DUAL POWER Instruction Manual

These warnings and safety notes are particularly important. Please follow the
instructions for maximum safety; otherwise the charger and the battery can be
damaged or at worst it can cause a fire.
Never leave the charger unattended when it is connected to its power supply. If any
malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the
operation manual.
Keep the charger well away from dust, damp, rain, heat, direct sunshine and
Never drop it.
The allowable DC input voltage is 11~18V DC
The allowable AC input voltage is 100~240V AC
This charger and the battery should be put on a heat-resistant, noninflammable and
nonconductive surface. Never place them on a car seat, carpet or similar. Keep all
the inflammable volatile materials away from operating area.
Make sure you know the specifications of the battery to be charged or discharged to
ensure it meets the requirements of this charger. If the program is set up incorrectly,
the battery and charger may be damaged .It can cause fire or explosion due to
overcharging.
Standard Battery Parameters
LiPo
Nominal
3.7V/cell
Voltage
Max Charge
4.2V/cell
Voltage
Storage
3.8V/cell
Voltage
Allowable
≦1C
Fast Charge
Min. Discharge
3.0-3.3V/cell 2.9-3.2V/cell 2.6-2.9V/cell 0.1-1.1V/cell 0.1-1.1V/cell 1.8V/cell
Voltage
Be very careful to choose the correct voltage for different types of battery otherwise you
may cause damage to the batteries. Incorrect settings could cause the cells to fire or
explode.
B6AC+ V2

WARNING AND SAFETY NOTES

LiIon LiFe
3.6V/cell 3.3V/cell
4.1V/cell 3.6V/cell
3.7V/cell 3.3V/cell
≦1C ≦4C
NiCd MiMH
1.2V/cell 1.2V/cell
1.5V/cell 1.5V/cell
n/a n/a
1C-2C 1C-2C
vibration .
Pb
2.0V/cell
2.46V/cell
n/a
≦0.4C
05 ·