Safety Instructions - TechniSat EC 4004 Operating Instructions Manual

Technisat satellite receiver operating instructions ec 4004
Table of Contents

Advertisement

*EC 4004 ENGL.
14.12.1999 9:56 Uhr

2. Safety instructions

Styrofoam packing harmful to the environment has not been used. The packing which can be
recycled corresponds to the requirements of the new packing regulations.
Never open the device. There is danger of an electric shock. Repairs should only be carried
out by qualified specialists.
Heating and ventilation: The housing cover contains slots for the required ventilation which
Water and humidity:
Power supply:
Cleaning:
Operation interruption:
In the following cases disconnect the device from mains and ask a specialist for help:
- the power supply cord or the connector are damaged
- the device was exposed to humidity or a liquid has flown into the device
- in case of considerable malfunctions
- in case of considerable external damage.
Seite 5
For your own protection carefully read the safety precautions befo-
re starting to use your new device.
The manufacturer is not liable to damage caused by improper
handling or by disregarding the safety precautions.
Take care that empty remote control batteries are not put into the
household waste but disposed off properly (return to specialist sto-
res, special waste)
are not to be covered during operation. Do not use the device near
heatings, stoves or other heat sources.
Protect your device against liquids and do not use it in rooms with
high air humidity.
Only connect the device to power sources indicated on the device
or in the operating instructions.
Before cleaning the device unplug the connector and use a moi-
stened cloth.
During a storm or when operation is interrupted for a long time dis-
connect the device from mains.
5
TechniSat EC 4004

Advertisement

Table of Contents
loading

Table of Contents