Table of Contents
Advertisement
*EC 4004 ENGL.
14.12.1999 9:59 Uhr
Press the
keys to toggle the polarizer current between "-60" (-60 mA) and "+60" (+60mA).
The value changes by 2 units per key depression. Hold the key depressed to change the value
continuously.
5.2.3.5 Example
The following example is a short explanation of the most important settings. Please observe
chapter 5.2.3 "channel settings" in order to enter the parameters correctly.
The radio channel RADIOROPA INFO (subcarrier of PRO7) is to be memorized to channel 50.
ASTRA reception is assumed.
1.
select table 1 with
then enter "03" by using the ten-key keypad.
Now the picture of PRO7 should be displayed, if not, please follow instructions 2, 3 and 4.
2.
press the TUN key, check the receive frequency
3.
set LNB voltage
4.
when using a polarizer optimize the SKEW value.
5.
press the
A/B
6.
press
M/ST
7.
press
to select stereo operation
SAT
8.
press
to set the optimal parameters for audio bandwidth,
deemphasis and video level of the channel.
9.
The data is memorized in the user table by pressing
desired channel number.
Seite 21
M/ST
an
d
key and enter the frequency for channel A
and enter the frequency for channel B
and
MEM
•
and entering the
21
TechniSat EC 4004
Advertisement
Table of Contents
