*EC 4004 ENGL.
14.12.1999 9:59 Uhr
MEM
>
Press
•
and enter "02".
MEM
>
press
•
for a second time or wait approx. 4 seconds, and ARD is memorized on channel 2.
>
As long as the memory display is on screen you can interrupt the process by
>
pressing other keys, for example the channel selection keys.
Warning: If you do not enter a number after pressing
tion (in our example: 01).
Since channel 2 in the user table is now overwritten by channel 1,you must copy ZDF from table 1.
SAT
>
press
quickly followed
>
by
.
>
select ZDF with "02"
>
and memorize this by pressing
Now you have stored ZDF to channel 1 of the user table.
5.2.2 Deleting
You can only delete channels in the user table!
>
select the undesired channel and
>
press the recessed
Now the channel position is deleted and is skipped when switching the channel selection keys.
If you directly enter the channel number, the respective channel is taken from the most recent-
ly selected preprogrammed table.
>
to delete the entire user table, press
Consequently, the channel selection keys are ineffective.
Seite 18
DEL
•
and by entering "01".
DEL
•
key using a ball point pen.
SAT
MEM
•
, the channel remains in the old posi-
DEL
•
,
,
shortly one after another.
18
TechniSat EC 4004