Operation; General; Switching On And Off; Channel Selection - TechniSat EC 4004 Operating Instructions Manual

*EC 4004 ENGL. 14.12.1999 9:56 Uhr

4. Operation

4.1 General

4.1.1 Switching on and off

After being turned on, the receiver reselects the channel which was set before the device has been switched off.
Yet, if in the meantime the power supply has been interrupted, the device selects channel 1 upon powering up.
> switch on and off with
> switch on with ten-key keypad

4.1.2 Channel selection

> with ten-key keypad
> 7 8
> 3 (wait 4 s)
> 0 3
> with on remote control or
CHANNEL

4.1.3 Volume

VOL
> with lower
> with higher
VOL
MUTE
> turn off with

4.1.4 Mono/stereo

M/ST
> select to switch between mono
> and stereo

4.2 D/D2 MAC reception

The reception of MAC channels is indicated by the second display element with a c. The following displays iden-
tify the different screen formats:
> screen format 4:3
> screen format 16:9

4.2.1 Colour intensity

Seite 8
STANDBY
or or
on receiver
8
TechniSat EC 4004