Table of Contents
Advertisement
*EC 4004 ENGL.
14.12.1999 10:01 Uhr
8. Technical data
Tuner
input frequency:
input resistance:
input level:
input connection:
bandwidth:
tuning:
Outdoor unit supply
LNB supply voltage:
polarizer current:
Video
deemphasis
PAL:
MAC:
output level:
output:
output resistance:
Decoder output
mode of operation:
output level:
output:
output resistance:
Audio
carrier frequency (PAL):
IF bandwidth (PAL):
modes of operation (PAL):
deemphasis (PAL):
output level:
output:
HF modulator
UHF range:
colour standard:
UHF output level:
UHF output:
antenna input
Seite 35
950-2050 MHz
75 ohms
44-78 dBV
F connector
27 MHz
PLL frequency synthesis
14 V / 18 V switchable at a maximum of 400 mA
modulation with 22.2 kHz, Vp-p = 500 mV
can be switched off
feed only in active mode, switchable to
permanent feed using an internal coding jumper,
also in standby mode
-60 mA... + 60 mA adjustable in steps of
approx. 2 mA
CCIR REC 405-1
according to MAC specification
Vp-p = 1 V
SCART & CINCH connector
75 ohms
4 different signals switchable
Vp-p = 1 V or 0.4 V (flat)
SCART & CINCH connector
75 ohms
5.5 ... 8.7 MHz
130/200/280/380 kHz switchable
mono/stereo switchable
50 Ês, 75 Ês, J 17, adaptive
(Panda-Wegener compatible)
50 Hz... 15 kHz
Vp-p = approx. 2 V in case of full drive
SCART & CINCH connector (left, right)
channel 32...42 adjustable
preset to channel 39
PAL G
74 +/- 4 dBÊV
IEC male connecto
IEC female connector
35
TechniSat EC 4004
Advertisement
Table of Contents
