Changing Timer Programming; Deleting Timer Programming; Programming A New Timer Event; Timeshift - TechniSat TechniBox SIR Instruction Manual

Accept settings
To accept and store the settings made in this menu, proceed as follows:
Use the up/down arrow buttons to highlight the Event type line.
>
The changes made are stored by pushing the OK button.
>
alternatively:
Push the Back button to cancel the changes.
>

8.2.3.1 Changing timer programming

To change an existing timer setting, use the arrow buttons up/down to mark the
>
timer event you wish to change.
Press the OK button to go to the settings of the marked timer. Now make your
>
settings here in accordance with Point 8.2.2
Use the up/down arrow buttons to highlight the Event type line.
>
When you have completed the programming, press the OK button, to transfer the
>
data to memory.

8.2.3.2 Deleting timer programming

Use the arrow buttons up/down to highlight an existing timer setting.
>
Press the red function key Delete.
>
The message appears "Do you really want to delete this reservation?"
To delete the timer entry, confirm by pressing OK.
>
Or leave the message using the Back button.
>

8.2.3.3 Programming a new timer event

Press the green function button Add to go to the entry window for programming a
>
new timer event. Now make your changes here in accordance with Point 8.2.2.

8.3 Timeshift

Press the Pause button.
>
The recording of the programme is started.
To continue playing back the programme from this point, press the Play button again.
>
You are now watching the programme with a time delay to the live broadcast (Timeshift),
while the programme continues to be recorded in the background.
43