Troubleshooting - WERTHEIM 7 Series Instruction Manual

TROUBLESHOOTING

Service problems that appear to be major can often be solved easily. You can
be your own troubleshooter by reviewing this guide. All other servicing should
be performed by an authorised service agent or qualified technician.
Contact Wertheim Customer Service for your nearest authorised service agent
on 1800 815 270.
Fault Solutions
The cleaner will Check that the power cable is inserted securely; remove from
not turn on. the power supply and then reinsert into the power supply.
Refer to pages 11 & 13 of the manual.
The vacuum Switch off the machine.
performance Check the appliance to ensure there are no blockages.
is deteriorating Clear any blockages that may be found.
or the Dust Bag Check that the pre-motor filter is not dusty; clean rubbish or
Indicator is replace the pre-motor filter and Exhaust HEPA filter.
flashing. Check whether the dust bag is full; replace the dust bag if it
is full.
The cleaner Turn off the cleaner immediately.
makes an Check the appliance to ensure there are no blockages.
abnormal sound Clear any blockages that may be found.
when switched Check that the powerhead is installed securely.
on.
20