Protecting The Environment; Troubleshooting - WERTHEIM W6030 Instruction Manual

FAULTS
Do not continue to use this appliance if it appears to be faulty or the supply cord is
damaged. If a fault cannot be rectified, please return to the point of purchase.
If damaged, return the cleaner for repair by an authorised Wertheim Service Centre in
order to avoid a safety hazard.
Consult the trouble shooting guide in this manual if your vacuum cleaner fails to operate
properly. Contact an authorised service agent if the problem persists.
AFTER USE
Switch the cleaner off and remove the plug from the electricity supply. Always switch
off and remove the plug before attaching any accessories or cleaning the appliance.

PROTECTING THE ENVIRONMENT

When you have unpacked the unit, do not simply throw the packing into the household
waste. Take them to an appropriate collecting point for the recycling.
Wertheim
Model 6030
230-240V 50Hz
1700W nom. 1900W max
2100W max with Power Brush fitted
PROBLEM
Motor does not start or
stops.
Suction force gradually
decreases.
Power Brush does not
operate.
Due to our program of continuous product improvement and innovation, sometimes the
product you buy may differ slightly from the one shown on this product carton
2193412-05.indd 4
TROUBLE SHOOTING
CAUSE
No power supply.
Dust-bag is full,
suction hose, wand is
blocked or dirty filters.
Not switched on,
reset-button tripped,
belt broken.
4
REMEDY
Check cable, plug
and socket. If still
inoperative, contact
service agent.
Replace dust-bag,
remove objects from
hose, wand, replace
filters.
Switch on, press
reset-button, have belt
replaced by service
agent.
1/2/08 11:10:02 AM