Instructions For Use; Standby On/Off Button; Rewind - WERTHEIM 7 Series Instruction Manual

INSTRUCTIONS FOR USE

Using the Cable Rewind Button and Standby On/Off Button

Standby On/Off Button

1. Unwind a sufficient length of cable. The
yellow mark on the power cable shows
the ideal cable length.
DO NOT extend the cable beyond the
red mark.
2. Insert the power plug into the power
socket.
3. Press the Standby On/Off button to put
the vacuum into Standby Mode.
4. To switch On the cleaner either:
a. Press the On/Off Button on the
Control Handle.
b. Alternatively, press the Power
Decrease or Power Increase buttons
on the Digital Power Control panel.

Rewind

1. Press the On/Off button to switch off the
vacuum.
2. Unplug the cable from the power
socket.
3. To rewind the power cable, press the
rewind button with one hand and guide
the cable with the other hand to ensure
that the power cable does not whip.
Note: Do not unplug by pulling on the power
cord. To unplug, grasp the power plug not
the power cord and gently pull the power
plug from the power socket.
11