ASSEMBLING THE VACUUM CLEANER
IMPORTANT! Always remove the power plug from the power supply
before fitting or removing accessories!
1. Flexible Hose
Fitting:
Insert the flexible hose into the air inlet of the
vacuum. Press until it clicks into position.
Removing:
Press the two buttons and gentle pull to
release the flexible hose.
2. Handle
1. Gently insert the handle into the
telescopic tube and push until it clicks
into place.
2. Place the powerhead onto the floor and
gently insert the telescopic tube into
the powerhead. Push until it clicks into
Rod
Quick
place.
Release
Note: The powerhead has a quick release
button to remove the rod for easy and
convenient access. Simply press the Rod
Quick Release to remove the rod from the
powerhead.
7