Cleaning The Motorised Powerhead - WERTHEIM 7 Series Instruction Manual

Cleaning the Motorised Powerhead

WARNING! Ensure that the cleaner is disconnected from the power
supply and the powerhead is disconnected from the rod before
performing any maintenance procedures.
The agitator bar must be free of debris
for effective cleaning and for maximum
suction.
1. Disconnect the motorised powerhead
from the vacuum rod and turn it over to
inspect the agitator bar.
2. If a build-up of debris is wound around
the agitator bar, remove by carefully
cutting with scissors. Avoid damaging
or cutting the bristles.
The powerhead has an overload protection
feature to protect the motor in the
powerhead. The powerhead will turn off
if the powerhead is clogged. To reset the
powerhead once it has automatically
turned off, clean the rotating brush and
then press the Overload Protection button
to reset the powerhead.
17