WERTHEIM Deep Clean W3000 User Manual
  1. Manuals
  2. Brands
  3. WERTHEIM Manuals
  4. Vacuum Cleaner
  5. Deep Clean W3000
  6. User manual

WERTHEIM Deep Clean W3000 User Manual

Deep cleaning bagless vacuum with powerhead
Hide thumbs

Advertisement

Table of Contents

User Manual
Deep Cleaning
Bagless Vacuum
with Powerhead

Advertisement

Table of Contents
loading

Related Manuals for WERTHEIM Deep Clean W3000

Summary of Contents for WERTHEIM Deep Clean W3000

  • Page 1 User Manual Deep Cleaning Bagless Vacuum with Powerhead...
  • Page 2 Features On/off button Flexible hose Telescopic wand Wand length adjustment Cord rewind button Combination floor brush Dust canister Combination floor tool Mini hand turbo tool Dusting brush Crevice tool...
  • Page 3 IntroDuCtIon Congratulations on the purchase of your new Wertheim vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction manual so that you may take best advantage of them. Due to our program of continuous product improvement and innovation, sometimes the product you buy may differ slightly from the one shown on this product carton/manual.

  • Page 4: Before You Begin

    BEForE You BEGIn The cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial cleaner, and is not designed for the collection of vitreous building material including particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass etc or excessive or frequent sand.

  • Page 5: Safety Instructions

    SAFEtY InStruCtIonS Important Always switch off the cleaner and remove the plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label.
  • Page 6 SAFEtY InStruCtIonS (Cont’D) 8. Ensure the appliance is switched off from the mains power supply before before unplugging. connecting the hose to the unit. 9. Do not handle or operate the 16. Do not operate or use the appliance appliance with wet hands and without the dust bag and/or filters follow electrical safety precautions in place.
  • Page 7 23. Keep ends of the hose, telescopic - Do not immerse it in water wand and other openings away for cleaning; from your face and body. - the hose should be checked regularly and must not be used 24. Do not use the vacuum cleaner if damaged.

  • Page 8: Instructions For Use

    InStruCtIonS For uSE Before using, unwind a sufficient length of cable and insert the plug into the power socket. A yellow mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red mark. Press the on/off button to turn the vacuum on.

  • Page 9: Assembling Your Cleaner

    Assembling your Cleaner The cleaner should be switched off and disconnected from the mains power supply before you start to assemble. Connect the hose body connector to the cleaner making sure it fits firmly. Fit handle into the telescopic wand until it clicks into place. Extend or reduce the length of the wand by depressing button and moving the slider.
  • Page 10 InStruCtIonS For uSE (Cont’D) Assembling your Cleaner cont. Push the wand into the powerhead until it clicks into place. To remove, press button and separate. The powerhead can be controlled by the on/off switch on the handle. Also provided is a combination floor tool.

  • Page 11: Safety Precautions

    Powerhead The use of a powerhead is recommended for the optimal cleaning of carpets. The rotating design allows the powerhead to move in any direction, making it easily manoeuvrable around obstacles. Safety Precautions Keep hair, hands and feet away from the rotating brush roller while the powerhead is running.

  • Page 12: Maintenance

    MAIntEnAnCE How to Clear Blockages • Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for blockages, continuing with each step until the blockage is found. Hose/Wand Blockage •...
  • Page 13 Mini Hand turbo Brush (cont’d) Step 4: Remove any dirt or hair from the roller brush. Step 5: Replace the clear cover. Step 6: Lock the neck on the Mini Hand Turbo Brush by twisting clockwise. Step 7: Rotate the external bristles down and lock the side release buttons by pushing upwards.
  • Page 14 MAIntEnAnCE (Cont’D) Emptying and Cleaning the Cyclonic Separator (Dust Canister) The cleaner should be switched off and disconnected from the mains power supply before you start to empty or disassemble. Press the dust canister release button to remove canister from cleaner. To empty dust canister, press release button and dispose of dirt.
  • Page 15 Separate items for cleaning. Reassembly is a reversal of Step 3. With a cloth dampened with water, clean all surfaces of the separator and canister and dry thoroughly. When thoroughly dried, refit canister to handle/separator assembly and fit back into cleaner.

  • Page 16: Changing Filters

    MAIntEnAnCE (Cont’D) Changing Filters The cleaner should be switched off and disconnected from the mains power supply. Never operate without filters as overheating and damage to cleaner could occur. To remove HEPA filter rotate wheel hub anti-clockwise. Remove HEPA filter from wheel hub and discard.
  • Page 17 To replace the motor filter, remove canister and locate the filter cover indentations A and B. Lift filter cover by placing fingers into indentations. The motor filter, if clogged or dirty, must be replaced.

  • Page 18: Troubleshooting

    trouBlESHootInG Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an authorised service agent or qualified technician. Problem Cause remedy Check cable, plug and Motor does not No power supply.
  • Page 19 Waverley Victoria 3150, AUS: 1800 815 270, or replaced if the goods fail to be of acceptable NZ: (09) 263 7573, Monday – Friday, 9am-5pm quality and the failure does not amount to a EST. Email: enquiries@wertheim.net.au major failure.” online Email www.wertheim.net.au...
  • Page 20 International Cleaning Solutions Pty. ltd. ACN 119 462 798 Level 1, Building 2, Brandon Business Park 530 Springvale Road, Glen Waverley, Victoria 3150 www.wertheim.net.au www.wertheim.co.nz enquiries@wertheim.net.au V1 06/13...

Table of Contents