Pre-Motor Filter Replacement - WERTHEIM 7 Series Instruction Manual

Pre-Motor Filter Replacement

WARNING! Ensure the cleaner is disconnected from the power supply
before performing any maintenance procedures.
5. Gently close the cover, you will hear a
'click' when closed properly.
Note: Please ensure that the dust bag is
fully inserted into the dust bag bracket
before closing the cover to avoid dust
leaking from the dust bag.
The pre-motor filter should be replaced
every six months or when it becomes visibly
dirty.
Always operate the cleaner with clean
filters; otherwise, there may be a reduction
in the suction power or motor damage may
result.
Note: Do not use a washing machine to
wash the filter or a hair drier to dry the filter.
1. Pull out the filter bracket assembly.
2. Replace with a new filter.
15