Synchronising The Wireless Control Handle - WERTHEIM 7 Series Instruction Manual

SYNCHRONISING THE WIRELESS CONTROL HANDLE

IMPORTANT! If the cleaner is unresponsive after placing the cleaner into
standby mode and switching on the cleaner via the Control Handle,
please follow the below steps to synchronise the handle to the vacuum.
POWER
INCREASE
BUTTON
1.
Press the Standby On/Off Button. The
cleaner will be in standby mode.
2.
Simultaneously press and hold for 20
seconds the Power Decrease and Power
Increase buttons on the Digital Power Control
panel. If preformed correctly, the icons on the
Digital Power Control panel will blink and the
Dust Bag Indicator light will be switched off.
3.
Press the "+" button on the Wireless Control
Handle to synchronise the Wireless Control
Handle to the vacuum. If preformed correctly
the Dust Bag Indicator light will blink and
the icons lights on the Digital Power Control
panel will turn off.
13