Access Via Cli - THOMSON SpeedTouch 605 User Manual

1.3.2 Access via CLI

Command Line
Interface (CLI)
E-DOC-CTC-20050429-0104 v1.0
You can access the Command Line Interface (CLI) via:
The embedded Expert pages. For more information, see
Configuration" on page
A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
The serial 'Console' interface
Quote site commands (over FTP)
For more information, see
For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.
101.
" Quote site command" on page
Chapter 1
Your SpeedTouch™
"5 Expert
17.
13