Vpn Server - THOMSON SpeedTouch 605 User Manual

5.7.3 VPN Server

The SpeedTouch™ as
VPN Server
Configuration
procedure
E-DOC-CTC-20050429-0104 v1.0
In a VPN client-server scenario, the VPN server is always the responder in the IKE
negotiations. Various VPN clients can dial in to a VPN server, since it supports
multiple simultaneous VPN connections. A VPN server does not know a priori which
remote Security Gateway will attempt to set up a VPN connection. In time, new
users may join the VPN. It is an advantage that the SpeedTouch™ VPN server
requires no modifications to its configuration when new clients are added to the
VPN. The SpeedTouch™ can establish a secure connection with any Remote
Gateway that meets the VPN settings, regardless its location in the public network.
The use of the Extended Authentication protocol can optionally be configured. In this
case, a list of authorized users is composed and stored in the SpeedTouch™.
Perform the following steps to configure your VPN server:
Select VPN > VPN Server.
1
Fill out the various parameter fields in the VPN Server web page.
2
Select the IKE Authentication method. Either Preshared Key or Certificate
3
Authentication can be selected.
Click Apply to confirm the data and Save All to make the configuration
4
permanent.
Optional: If you use the Extended Authentication protocol, you have to compose an
authorized users list.
Chapter 5
Expert Configuration
175