Connect To The Internet Via Speedtouch™'S Embedded Ppp Client - THOMSON Speedtouch 600 Series Orientation Manual

2 SpeedTouch™610 Internet Connectivity
2.1 Connect to the Internet via SpeedTouch™'s
Introduction
24
embedded PPP Client
The SpeedTouch™ supports both two most popular connection methods: Routed PPP
over ATM (PPPoA) and PPP over Ethernet (PPPoE).
The connection method to use depends on the preferences of your ISP, hence the
connection profile you must apply to the SpeedTouch™ via the SpeedTouch™ Setup
wizard or its embedded Easy Setup wizard.
Note To use the embedded Routed PPPoA (PPPoE) dial-in client, the
SpeedTouch™ needs to be configured for Routed PPPoA (PPPoE) via the
SpeedTouch™ Setup wizard or the embedded Easy Setup wizard.
To use a host PPPoE dial-in client, the SpeedTouch™ needs to be configured
for Bridged Ethernet or Routed PPPoE (with PPPoE Relay) via the
SpeedTouch™ Setup wizard or embedded Easy Setup wizard.
E-SIT-CTC-20030306-0004 v2.0